WDW-S series digital display electronic universal pressure testing machine_Special purpose electronic universal testing machine_详情

1. Brief introduction

WDW-S series digital display electronic pressure testing machine is mainly used to test the mechanical properties of various glass fiber geotextiles, plastic warp-knitted geotextiles, geosynthetics, and geogrids for tensile, bursting, and puncture. The precise automatic control and data acquisition system realizes the fully digital adjustment of the data acquisition and control process. During the test, the technical indicators such as the maximum bearing capacity, strength, elongation deformation and elongation of the material are tested. The above detection parameters are automatically calculated by the main controller according to the test parameter conditions set at the beginning of the test after the test is over, and the corresponding test results are displayed at the same time. After the test, each test parameter can be queried and displayed or printed (the printer needs to be customized , Additional cost), additional accessories can be used for mechanical performance testing of other materials.

Product design, manufacturing and inspection are based on the relevant provisions of the following standards

1) GB/T2611-2007 "General Technical Requirements for Testing Machines"

2) GB/T16491-2008 "Electronic Universal Material Testing Machine"

3) JJF1103-2003 " Evaluation of Computer Data Acquisition System for Universal Testing Machine "

4) GB/T13763-1992 Geotextile tearing strength test method by trapezoidal method

5) GB/T 19470-2004 Geosynthetics Plastic Geonet

6) JT/T520-2004 highway engineering geosynthetic material short fiber needle punched non-woven geotextile

7) GB/T17690-1998 Plastic flat wire woven geotextile

8) GB/T 1040. 1-2006 "Determination of tensile properties of plastics Part 1: General test methods"

9) JTJ239-98 Technical Specification for Waterway Engineering Fabric Application

10) JC839.1-1998 fiberglass geogrid for pavement

11) JJG139-1999 "Verification Regulations for Tension, Pressure and Universal Testing Machines"

2. The main technical indicators of the testing machine

Test machine model		WDW-S5	WDW-S10		WDW-S20		WDW-S30		WDW-S50	WDW-S100
1	Maximum test force	5kN	10kN		20kN		30kN		50kN	100kN
2	Test machine level	0.5 level 1 level
3	Load measurement range	0.4%-100%FS (level 0.5)/1%～100%FS (level 1)
4	Test power resolution	1N
5	Displacement resolution	0.01mm
6	Force control rate adjustment range	0.005% -5% FS / S
7	Force control rate control accuracy	rate When the rate is ≥0.05%FS, it is within ±1% of the set value;
8	Deformation rate adjustment range	0.05% -5% FS / S
9	Deformation rate control accuracy	rate When the rate is ≥0.05%FS, it is within ±1% of the set value;
10	Test span	400mm can be customized and widened
11	Tensile test space	800mm can be customized to increase height
12	Compressed test space	700mm can be customized to increase height
13	Loading method	electric
14	Power supply voltage ( reliable grounding measures must be provided )					～220V±10% 50Hz；
15	Host size (Length, width, height)	660×415×1500		740×450×1600				755×520×1780		850×555×1900