Brief description

The product shown in the figure above is the digital display type mine bolt and anchor cable tension test machine produced by Jinan CapitaLand Instruments Co., Ltd. The following is the detailed information about the digital display type mine bolt and anchor cable tension test machine we introduced for you Happening. If you are interested in this product, you are welcome to call us at 0531-87180687.

1. Product overview:

WES-M600D/1000D digital display mine bolt anchor cable tensile testing machine is mainly used for breaking test and bearing capacity test of anchor rod, anchor cable and resin anchor rod.

The digital display mine bolt anchor cable tension testing machine is composed of a four-column double-screw cylinder under-mounted main engine and an oil source control cabinet. The tensile space is located above the host, and the compression and bending test space is located below the host, between the middle beam and the workbench. The adjustment of the test space is realized by the movement of the middle beam, and the lifting of the middle beam is driven by a chain.

The test process of the digital display type mine bolt anchor cable tension testing machine adopts hydraulic manual loading, sensor force measurement, real-time display of the maximum force on the digital display screen, and automatic storage and printing functions. After the test is completed, the maximum force and tensile strength test results of the material are automatically obtained.

2. Product features:

Digital display type mine bolt anchor cable tensile testing machine is equipped with special tensile aids and compression aids conforming to MT 146.2-2011, MT942-2005 and other standards, which can meet the rebar tensile test, anchor tensile test, Tensile test of anchoring force, tensile test of steel strand, tensile test of anchor cable, compression test of pallet for anchor rod.

3. Technical parameters:

3.1. Maximum test force: 600kN (60 tons), 1000KN (100 tons);

3.2. Testing machine level: level 1;

3.3. Test force classification: the whole process is not classified as equivalent to four files (the whole process resolution remains unchanged);

3.4. Effective measuring range of test force: 2%～100%FS;

3.5. Test force measurement accuracy: better than ±1% of the indicated value;

3.6. Oil cylinder stroke: 150mm;

3.7. Tensile and compressive space: the remaining moving or tensile size after the sample and fixture are clamped is ≥250mm;

3.8. Column center spacing: 540mm;

3.9. Clamping diameter of rebar and anchoring force stretching aids: Φ13～Φ40mm;

3.10. Retaining diameter of steel strand stretching aids: standard 15.2mm, other specifications are customized

3.11, size of upper and lower pressure plate: Φ160mm;

3.12 The maximum moving speed of the piston: 70mm/min;

3.13. Lower beam adjustment speed: 120mm/min;

3.14. Power supply: 380V±10%/50Hz; oil pump motor power 1.1kW; beam moving up and down motor power 0.55kW;

3.15, the weight of the host: 2600kg;

3.16. Weight of oil source control cabinet: 120kg.

4. Equipment configuration:

4.1, a four-column double screw cylinder under-mounted main engine;

4.2. One set of oil source control cabinet;

4.3 One high-precision pressure sensor;

4.4. Configuration of special test aids:

4.4.1. A set of special aids for rebar and anchoring force tensile test;

4.4.2. A set of special auxiliary tools for anchor rod stretching;

4.4.3, a set of special auxiliary equipment for 15.2mm steel strand drawing, other specifications are optional;

4.4.4, a set of special auxiliary equipment for anchor cable stretching

4.4.5. A set of special compression aids for tray compression for Φ160mm anchor rods

4.5. A set of high-performance digital display test system for HST man-machine dialogue test machine;

4.6. One mini printer.

5. Function introduction:

5.1. The whole system has no adjustable devices such as potentiometers, which is convenient for users to use;

5.2. The system is fully digital design, with high precision, stability and safety;

5.3. The system adopts digital zero adjustment and parameter calibration;

5.4. After the test, the system automatically obtains the test result;

5.5. The display mode is simple and clear, easy to operate;

5.6. Display mode: the test force, loading speed, peak value, and test curve are displayed on the LCD screen in real time during the test;

5.7. Limit protection: with two-level limit protection functions of program control and mechanical;

5.8. Overload protection: When the load exceeds 3～5% of the rated value, the equipment will automatically stop working;

5.9. The test data can be inquired, printed and browsed through the network.

Remarks: The above parameters are for reference only. For detailed parameters, please refer to the real equipment of the digital display type mine bolt anchor cable tensile testing machine!