1. Electro-hydraulic servo steel strand fatigue testing machine use:
PWS- 1000 Electro-hydraulic Servo Steel Strand Fatigue Testing Machine is mainly used for the fatigue life test of steel strands in GB/T5224, ISO6934 and other related standards. It can also be used for steel wires, steel rods and other related materials, various mechanical parts, and others. Dynamic and static mechanical performance test of metal materials and components. By changing the fixture, the tensile, compression, high-cycle, low-cycle, fatigue crack test and research of materials and parts can be completed. This machine is equipped with special test clamping accessories for steel strands. According to different sample specifications, the corresponding clamping accessories are selected to complete the fatigue life test.
2. Technical parameters of electro-hydraulic servo steel strand fatigue testing machine
Serial number |
Project Description |
technical parameter |
1 |
Maximum static test force |
±10 00kN |
2 |
Test force indication accuracy |
±1% within the range of 2%-100%FS |
3 |
Dynamic display fluctuation of test force |
±1%FS |
4 |
Maximum displacement of actuator |
±50 mm Indication accuracy ±0.5%FS |
5 |
Main test waveform |
Sine wave, triangle wave, square wave, half square wave, oblique wave, etc. |
6 |
way to control |
Force and displacement fully digital PID closed-loop control |
7 |
frequency |
0.01-30Hz |
8 |
Steel strand specification |
Φ9.5mm-φ28.6mm |
9 |
Steel wire steel rod specifications |
Φ5mm-φ13mm |
10 |
Maximum test adjustment space |
1500mm |
11 |
Test space adjustment method |
Hydraulic lifting and locking beam |
12 |
Control System |
Domestic or German EDC580 |
13 |
Constant pressure servo pump station |
2× 11 0L/min, 2×45kW,380V |
