1. Use characteristics of YYQ-5A ring driven balancing machine:
    YYQ ring driven balancing machine series is a hard-supported horizontal dynamic balancing machine, which adopts roller support and ring belt dragging. The ordinary type is driven by two-speed motor, "A" type The speed is adjusted by the frequency conversion motor and the frequency converter. The data processing is carried out by the industrial control computer. The color screen displays the imbalance value, phase angle and real-time speed in real time. The bed adopts integral casting with good stability. It is widely used in electric motors, fans, diesel engines, auto parts and other industries. It can perform balance measurement on single-sided, double-sided, and multiple calibration surfaces, and is suitable for shafts, discs, and center-of-gravity rotors. It has the characteristics of high efficiency, accurate accuracy, intuitive display, reliable quality, and convenient maintenance. The software is equipped with two calibration functions of ordinary workpiece and standard rotor, which overcomes the defects that users of other hard-supported balancing machine measurement systems are difficult to calibrate equipment by themselves. A variety of measurement methods and functions are available for selection, which can realize parameter input, preview, experiment, result storage, printing, and operation.
2. Technical parameters of YYQ-5A ring-driven balancing machine
1. Workpiece mass range kg: 0.1-5
2. Workpiece maximum diameter mm: 500
3. Distance between two supports mm: 60-600
4. Ring belt dragging diameter range mm: 15-200
5. Support shaft diameter mm: 4-40
6. Balance speed r/min: 400-2500
7. Minimum remaining unbalance: ≤0.5gmm/kg
8. Unbalance reduction rate %: ≥90%
9. Motor Power: 0.18KW
10. Speed regulation mode: frequency conversion speed regulation
11. Transmission mode: ring belt
three, YYQ-5A ring drive dynamic balancing machine software features
1. Industrial control computer 19-inch LCD color screen display;
2. Widows dual choice of Chinese and English systems;
3. Equipped with a general-purpose microcomputer balance measurement system;
4 . Fully automatic program-controlled amplification module;
5. Arbitrary workpiece calibration function, arbitrary angle fixture compensation and workpiece information storage;
6. Qualified quantity display, measurement cycle adjustment function;
7. Automatic signal amplification and manual amplification adjustment, signal self-check, automatic Diagnosis;
8. Vector graphics, waveforms and unbalanced amount can be displayed at the same time;
9. The remaining unbalanced amount g and the unbalanced torque g cm, g mm can be displayed
optionally ; 10. Optional function.
      1) Automatic tracking function of balance angle
      2 ), automatic parking positioning function
      3), vector angle decomposition function
Note: 1. The bed can be lengthened according to user requirements;
        2. The journal can be enlarged according to user requirements.