1. Features of the
    automatic milling weight-removing balancer : The automatic milling weight-removing balancer is used for 3-30kg disc auto parts, such as brake discs, brake cores, clutches, flywheels and other special testing equipment for drilling balance correction.
    The software adopts a precision balance measurement system, runs under windows, and has a fully automatic program-controlled amplification module, which is simple to operate and easy to use. Vector graphics, waveform and imbalance are displayed simultaneously. It has the characteristics of high efficiency, accurate precision, intuitive display, reliable quality and convenient maintenance. It can realize arbitrary input of parameters, arbitrary calibration, arbitrary angle fixture compensation, self-check, qualified quantity prompt, remaining unbalanced quantity g and unbalanced torque g.cm, g.mm multiple display modes, automatic storage of measurement results, operation of all menu structures , Automatically prompt.
2. Equipment parameters of automatic milling deweighting balancing machine:
 

1 Equipment model MAB-400
2 Workpiece mass range (kg) 3-30
3 Workpiece maximum diameter range (mm) 400
4 Average production cycle (pieces/sec) ≤80
5 Minimum achievable residual unbalance gmm/kg ≤2
6 Uneven Measurement reduction rate ≥90%
7 Balance speed range (rpm) 250-1000
8 Compressed air (KPa) 400
9 Correction method Drilling
10 Drill bit movement stroke (mm) 60
11 Sliding table working speed (mm/s) adjustable
12 Fast forward speed of sliding table (mm/s) adjustable
13 Maximum sector angle of workpiece displacement drilling (degree) ≥90°
14 Electrical consumption of the whole machine ≤5kw